10+ tweaks, tricks, and hacks to make Windows Vista fly
1: Add the Run command to the Start Menu
Beginning way back with the release of Windows 1.0, Microsoft has been all about the GUI interface (more or less effectively). But sometimes you just want to run a program without having to navigate the GUI maze of menus and folders. Windows Vista, by default,does not include the Run command on the Start Menu. This was a common and favorite feature of Windows XP.
To add the Run command back to the Vista Start Menu, follow these steps:
-
Right click the Taskbar in an open area
-
Click on Properties
-
Click on the Start Menu tab (See Figure A)
Figure A
Taskbar and Start Menu Properties
-
Click the Customize button to get to the Customize Start Menu
-
Scroll down the list until you find the Run command checkbox and check it (See Figure B).
-
Click OK and the Run command will now appear on the Start Menu.
Figure B
Customize Start Menu
2. Disable the Welcome Center and Sidebar
The Windows Vista default setting is to show the Welcome Center on startup. While the Welcome Center is mildly interesting the first time you see it, you will quickly tire of it appearing every time you boot your Vista PC. This behavior is easily changed by unchecking the Run a Startup button located at the bottom of the Welcome Center as shown in Figure C.
Figure C
Welcome Center
Similarly, the Vista Sidebar is also on by default. While some users will find the Sidebar and its widgets useful, many will desire the desktop real estate and underlying resources for other more productive uses. You can turn the Sidebar off by:
-
Right clicking the Windows Sidebar icon in the system tray
-
Click Properties
-
Uncheck the Start Sidebar when Windows starts checkbox (See Figure D)
-
Click OK
Figure D
Windows Sidebar Properties
3: Change the Product Key
A Windows Vista installation disk essentially has all of the various editions of Vista included on that one disk. Which version gets installed is dependent on what product key you enter during the installation process. At some point you may want to upgrade your current version to a version with more bells and whistles, which would require a new Product Key.
Or you may want to Activate your Windows Vista under a different Product Key for some reason. The easiest way to change your Product Key is through the System applet in the Control Panel. (See Figure E)
Figure E
System applet
Figure F
Windows Activation
Under the Windows Activation section there is a link: Change Product Key. Clicking that link brings up the screen shown in Figure F where you can enter in a different Product Key.
4: Start Windows Explorer at somewhere other than documents
Figure G
Windows Explorer Properties
While Windows Vista has desktop search that will theoretically allow you the option of merely typing in a location on your hard disk to get an Explorer view, some users will undoubtedly prefer to use Windows Explorer. By default, Windows Explorer in Vista shows you the files located in the user Documents folder. Follow these steps to have Windows Explorer start in a different folder:
-
Copy the Windows Explorer shortcut, usually found in the Start Menu under Accessories, to the Desktop.
-
Right click the shortcut and click properties.
-
Click on the Shortcut tab to get the window shown in Figure G.
-
Change the Target filed to the desired location.
For example, to have Windows Explorer start at C:\ type in"
C:\Windows\explorer.exe /n, /e, c:\
5: Privacy tweak
As a convenience, Windows Vista by default saves and displays a list of recently opened files and programs on the Start Menu.
Ostensibly, this is supposed to make it easier to find a file or program. However, many users would prefer that information to remain hidden. Here is how to turn it off:
-
Right click the Taskbar and click Properties on the resulting menu
-
Click the Start Menu tab
-
Uncheck the checkboxes under Privacy (See Figure H)
-
Click OK
Figure H
Privacy settings
6: Smaller icons on Start Menu
The icons located on the Windows Vista Start Menu default to large (Figure I).
Figure I
Large icons
For many users, the personal preference will be for those icons to be much smaller. Here is how:
-
Right click the Taskbar and click on Properties
-
Click the Start Menu tab
-
Click the Customize button
-
Scroll down to the bottom of the list (See Figure J)
-
Uncheck the Use large icons checkbox
-
Click OK twice
Figure J
No more large icons
7. Add Internet Explorer to the Vista Desktop
For some reason known only to the Windows Vista development team, there is no easy option to add the Windows Explorer icon to the Vista Desktop. You can add Computer, Recycle Bin, and the Control Panel --- perhaps someone can explain that to us. In the meantime, if you want to add Internet Explorer you can do it with a Registry hack. Before editing the Windows Registry it is always advisable to make a backup of the Registry file.
-
Click the Start button
-
Open the Run dialog box (or type regedit in to the search box on the Start Menu)
-
Type in regedit and press Enter
-
Navigate to the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\HideDesktopIcons\NewStartPanel
-
Create a new DWORD 32-bit by right clicking in the key area (See Figure K)
-
Copy this as the key name including the brackets:
{871C5380-42A0-1069-A2EA-08002B30309D}
-
Close regedit
-
Right click on the Desktop and click the Refresh menu entry --- Internet Explorer should now appear.
Figure K
Regedit Internet Explorer
Figure L
Windows Security Center
8: Change Security Center notifications
One of the most often leveled criticisms of Windows has been its lack of security. To overcome that perception Microsoft had programmed Vista to complain loudly and often if it discovers your malware, firewall or virus protection software is off or requires
maintenance. For many users, the constant badgering to update your virus definitions is more annoying then effective. To calm Vista down a bit you can change the way you are notified of potential lax security.
Open the control panel and click the Windows Security Center as shown in Figure L.
Figure M
Choose you preference for notification
Click the link Change the way Security Center alerts me to reach the dialog box shown in Figure M.
9: Set Folder options
One of the first things experienced users change when they get a new Windows computer is change the Folder View options to a preferred setting. Windows Vista is no exception to this rule.
-
Open the Control Panel and click on the Folder Options icon
-
Click on the View tab (See Figure N)
Figure N
Folder options
-
Check or uncheck your folder preferences --- some suggestions:
a.Check show hidden files and folders
b.Uncheck Hide extensions for known file types
c.Uncheck protected operating system files
10: Adjust power settings
By default, Windows Vista sets the power options to what it calls a "Balanced" plan. While for many users this plan will be adequate, there are many who will want to make adjustments. For laptop users specifically, settings can vary greatly when operating on battery power versus plugged into an outlet. To adjust power settings:
Open the Control Panel and then click the Power Options icon (See Figure O)
Figure O
Power Options
Figure P
Power settings
Click on the Change Plan Settings under one of the default plans to make changes (See Figure P)
For additional fine tuning click Change advanced power settings (See Figure Q)
Figure Q
Advanced power settings
11: Reduce Desktop Icons
By default, the Windows Vista Aero GUI uses what it classifies as "Medium" icons on the Desktop. Medium in this case is really quite large. (There is also a Large icon setting, but we won't go there.) To bring the icons back to a less eye-popping size:
-
Right click on the Desktop
-
Choose the View menu item
-
Change to Classic Icons (Figure R)
Figure R
Classic
12 Add another time zone
For many of us working away from home offices at satellite offices, home or on the road, knowing the time across various time zones can be a necessary evil. Windows Vista will allow you to keep time in two additional time zones to the machine time.
-
Right click on the time display located in Taskbar System Tray
-
Select the Adjust Date/Time menu item
-
Click on the Additional Clocks tab (See Figure S)
-
Add clocks
Figure S
Choose a time zone
-
Click the checkbox next to Show this clock
-
Click OK
Now when you mouse over the time in the Taskbar System Tray you will get the time in your chosen time zones.
Latest post
- 15/05 - System Specifications for Windows Vista
- 14/05 - Windows Vista: Basic PC Terminology
- 10/05 - Windows Vista: Usages Notes
- 09/05 - Microsoft AdLabs
- 26/01 - 100 Things people are really saying about Windows Vista
- 23/01 - Vista Shorcut Overlay Remover
- 08/01 - Enable the (Hidden) Administration Accounon Windows Vista
- 04/01 - Windows Backup and Restore Center
- 24/12 - Windows Vista SP1 RC now available for public download
- 11/12 - Vista Meter
- 30/11 - Vista Manager, the New Operating System for Home Users
digg it
del.icio.us
main conversion factors you need to know are:
